• Create partial surfaces by defining a boundaries to specify the display area of the surface. Boundaries are created by selecting existing polylines or sketching new polylines.
  
• Add, modify, and delete the reference boundaries.
  
• Support for publishing partial surface data references.
  
• Support for exporting partial surface data references as LandXML.
  
• API for support for partial surface data reference workflows.
  

• Any type of label can now be queried and modified using the nodes in the Label category.
  
• The Profile View Depth Label option is now included as an option in the Choose Object Type drop-down.
  
• The CogoPoint.SetStyle node now supports setting the style to.
  
• Providing a null input to the Pipe.SetStructures node will disconnect a pipe from its start or end structures.
  

• Rebuilding corridor performance improvement for corridors using a surface as a target.
  
• Surface analysis performance improvement.
  
• Performance improvement when cursor moves over a surface whose contours have large number of vertexes.
  

• Updated API Surface.Operations(). InvalidOperationException will be thrown when it is a referenced surface.
  
• Added API property bool to query if a current entity is a partial reference object.
  

• Fixed an issue in which solids from distant regions were incorrectly connected when extracting solids from a corridor.
  
• Fixed an issue in which the DaylightMultiIntercept subassembly did not work correctly with its intercept number setting.
  
• Fixed an issue in which the top width parameter of subassemblies was not recognized when the value was set to a decimal.
  
• Removed the parameter slope direction from the subassembly LinkSlopeAndVerticalDeflection as it did not serve a purpose.
  
• Fixed an issue in which the output parameters of subassemblies with the same name in one assembly could not be selected when the option Parameter Reference Use was selected.
  
• Fixed an issue in which the assembly name after copy-paste was not incremented properly.
  

• Fixed a stability issue when selecting multiple COGO Points from the Edit Points Panorama or the Table in Prospector while the Properties palette was displayed.
  
• Fixed a stability issue when selecting multiple Pipe Network parts from either the Panorama or the table in Prospector while the Properties palette was displayed.
  
• Fixed a stability issue when selecting multiple Pressure Network parts from either the Panorama or the table in Prospector while the Properties palette was displayed.
  

• Fixed an issue in which feature lines extracted from a corridor moved after splitting the corridor region.
  
• Fixed an issue in which a layer for the solids extracted from one corridor changed to the current layer after adjusting its source DWG file.
  
• Fixed an issue in which hatches displayed inconsistently from the top view when different hatches were used on the top and bottom links at the same position.
  
• Fixed a stability issue when a drawing contained invalid hatches.
  
• Fixed an issue in which corridor links could not be selected if multiple section data was attached to sample lines when executing the command aeccreportcorridorslopestake.
  
• Fixed an issue in which a redundant subassembly displayed in the section view.
  
• Fixed an issue in which an alignment used as multiple corridor baselines caused the Corridor Points to report only points for the first baseline.
  
• Fixed an issue in which a warning message displayed multiple times for each corridor when running aeccreportcorridorslopestake.
  
• Improved error messaging while executing a Corridor Slope Stake report to provide correct information about the encountered issue.
  
• Fixed an issue in which solids could not be extracted from LinkMulti subassemblies.
  
• Fixed an issue in which a gap would occur when creating a region that started or ended at a station close to a geometry point.
  
• Added the ability to edit the Slope format and precision in the Corridor Lane Slope Report.
  
• Improved warning messaging reflect the actual product nomenclature when executing Corridor Slope Stake report.
  

• Fixed an issue in which ExistingGround CrossSect changes appeared different after re-importing and re-exporting.
  
• Added the ability to Shift-select multiple sources on the Sample more sources tab of the Sample line dialog box.
  
• Fixed an issue in which materials could not be changed in the Change Volume Tables dialog box under the table list.
  

• Fixed an issue in which certain surface types returned as objects instead of surfaces.
  
• Fixed an issue in which the Object.Color node would not return the correct color when the given object's color was set to ByLayer.
  
• Fixed an issue in which the CogoPoint.SetName node would display a warning message when setting the COGO point name to its current name.
  
• Fixed an issue in which the Get COGO Point Group node in automatic run mode returned results even though no inputs were provided.
  
• Fixed an issue in which the Layer.ByName node would not allow modifications to the current layer.
  
• Fixed an issue in which True/False property definitions created with the PropertySetDefinition.AddManualPropertyDefinition node caused Civil 3D to hang when accessed by the Style Manager dialog.
  
• Fixed an issue in which the PropertySetDefinition.AddManualPropertyDefinition node did not set the correct default value based on the property data type.
  
• Fixed an issue in which list definitions created using the PropertySetDefinition.AddManualPropertyDefinition node would not have the correct default value.
  
• Fixed an issue in which the PropertySetDefinition.AddAutomaticPropertyDefinition node would not correctly set the automatic property source.
  
• Fixed an issue in which the Viewport.TargetPoint node would incorrectly return the origin in certain cases.
  
• Fixed issues in which the Viewport.PaperToModelTransform and Viewport.ModelToPaperTransform nodes would return incorrect coordinate systems in certain cases.
  
• Fixed issues in which the Viewport.PointFromPaperToModel and Viewport.PointFromModelToPaper nodes would return incorrect points in certain cases.
  

• Fixed an issue in which publishing data with CS CzechJTSK/5b.Krovak resulted in the wrong location reported in ArcMap Online.
  
• Fixed an issue in which importing an ArcGIS feature layer with an elliptic arc segment in the geometry as a 3D polyline or feature line failed.
  
• Fixed an issue that caused a login failure to the ArcGIS enterprise portal with Windows authentication.
  

• Fixed an issue in which the Station Equation value was not shown correctly in a crossing pipe profile label.
  
• Fixed a stability issue that could occur with conflicting parameters in a customized pipe network catalog.
  

• Fixed an issue in which negative radius values of the vertical curves of profiles could not be imported using the _AeccLandXMLIn command.
  
• Improved a performance issue that occurred when exporting a layout to a model with the EXPORTLAYOUT command.
  
• Fixed an issue in which the highlight preview when selecting an object was not working when using transparent commands.
  
• Fixed an issue in which the startup value of BGcorepublish would not save when closing and reopening Civil 3D.
  
• Fixed a stability issue that could occur when the drawing font directory path was changed.
  
• Fixed an issue in which a custom view could not be saved.
  
• Fixed an issue in which the annotative text style was set to an incorrect font style than expected from templates.
  
• Fixed a stability issue that could occur when running API QTOUtility.GenerateXMLReport().
  
• Fixed a stability issue that could occur when using the UNDO function after creating Grading under certain conditions.
  

• Fixed an issue in which pressure fitting color was incorrect in Wireframe (Fast) view.
  
• Fixed a stability issue that could occur when calculating an unexpected pressure fitting boundary.
  
• Fixed an issue in which the List type property set could not be displayed in pressure fitting and appurtenance labels.
  
• Fixed an issue in which pressure pipe labels displayed incorrectly when the AECPSDAUTOATTACH command was run.
  

• Fixed an issue in which the creation of an offset profile for an offset alignment was incorrect in certain situations.
  
• Fixed an issue where for some scenarios the grid lines in Profile View/Section View were drawn incorrectly or were missing from certain parts of the view.
  

• Fixed a stability issue that occurred when a structure or pipe that did not reference a valid part in the parts catalog displayed in the Project Explorer window.
  
• Fixed a stability issue that occurred when a pipe network was selected in the Project Explorer window and did not reference a valid Parts List.
  

• Fixed an issue in which Applied Cant was not recalculating when the Start Station parameter was changed for a manual station.
  
• Fixed and issue in which a 0 Cant value at the spiral of a C-S-S-C curve group occurred when two curves have opposite clockwise orientations.
  
• Fixed an issue in which AUDIT commands incorrectly displayed an AeccDbRootSettingsNode(8C) error.
  

• Fixed an issue in which the override status of label components from a referenced template was not correct when reopening that drawing.
  
• Fixed a stability issue that could occur when editing an assembly style or intersection style imported from a reference template.
  

• Fixed an issue in which elements from a tool box could not be dragged into a sequence workflow in subassembly composer.
  
• Improved performance when opening or importing large PKT files.
  

• Fixed an issue in which surface points displayed or Descriptionted when its style layer was turned off or frozen.
  
• Fixed an issue in which the surface contour color changed when zooming in and out in Conceptual visual style with LOD mode enabled.
  
• Fixed an issue in which a coordinate system could not be exported to DEM and impacted performance when exporting large surfaces with grid spacing 1.0.
  

• Fixed an issue in which surfaces created by Data Clip boundary are different if only the elevation of the clip boundary is different.
  
• Fixed an issues in which TIFs created from Civil 3D could not be loaded to 3rd party applications.
  
• Fixed an issue in which multiple swap edge selection messages appeared when swap edge did not succeeded.
  
• Fixed an issue in which the first point did not highlight correctly in wireframe (fast) mode when selecting multiple surface points.
  
• Fixed an issue in which deleting a surface breakline in Prospector would not display that it was out of date.
  
• Fixed an issue in which a surface could not be created from GIS without an area of interest.
  
• Fixed an issue in which extra create snapshot listing under definitions after linking/promoting a surface.
  
• Fixed an issue in which surfaces from GIS Data were not created in Civil 3D using crossing selection.
  
• Fixed an issue in which viewing a draped image appeared flipped in the Object Viewer with hardware acceleration enabled.
  
• Fixed an issue in which surface boundary creation was generated differently from the intended source object.
  

Idézet:A kódrészlet megtekintéséhez be kell jelentkezned, vagy nincs jogosultságod a tartalom megtekintéséhez.