HHW.hu
Apulsoft splitS v1.1.2 - Nyomtatható verzió

+- HHW.hu (https://hhwforum.hu)
+-- Fórum: Letöltések (https://hhwforum.hu/forumdisplay.php?fid=9)
+--- Fórum: Programok (https://hhwforum.hu/forumdisplay.php?fid=49)
+--- Téma: Apulsoft splitS v1.1.2 (/showthread.php?tid=384192)

RE: Apulsoft splitS v1.1.2 - oaxino - 2025-11-10

[Kép: 0ccbd40c3806d9381232793fb04444f7.webp]
Free Download Apulsoft splitS v1.1.2 | 4.7 Mb
While de-essers and dynamic EQs can be very useful, they are rarely sufficient for effectively managing sibilance in vocal recordings.


Producers and engineers alike commonly find themselves spending long hours manually editing these problematic sounds. While often unavoidable, this method is very time-consuming and diverts attention from what really matters.
splitS is not a de-esser, but rather a straightforward mixer that allows you to balance sibilances, and separate a vocal track between sibilance and non-sibilance in a split of a second. The signal is left absolutely intact if no volume change is applied, as the cut between sibilance and non-sibilance is made on the full range signal.
No compression, no EQ, no crossover.
Since v1.1, the S-Range feature can detect the peak level of each S event, letting you set a maximum volume - or exclude soft events from the S channel.
splitS was developed in close collaboration with Swiss mixer Thomas "Mister T." Gloor.
Main Features
  • Advanced sibilance detection using spectral brightness, level, and pitch.
  • Splitting the signal into two full range components: sibilance and non-sibilance, allowing for precise editing directly on the audio track.
  • 100% signal integrity if no gain change is applied.
  • Scrolling waveform display shows splitting and level changes in real time.
  • New: S‑Range allows setting maximum and minimum levels for S‑events.
  • SoundFlow scripts package available on the SoundFlow store to automate the use of splitS in Pro Tools on macOS.
  • Plugin formats: AudioUnits/AAX/VST3 on macOS and Windows 64bit.
  • Multi-out support for NOS/S signals in Pro Tools, Reaper, Live, and Bitwig.
  • Typical latency (parameter-dependent): ~30ms
Home Page-
Idézet:A kódrészlet megtekintéséhez be kell jelentkezned, vagy nincs jogosultságod a tartalom megtekintéséhez.

Rapidgator
Idézet:A kódrészlet megtekintéséhez be kell jelentkezned, vagy nincs jogosultságod a tartalom megtekintéséhez.

Idézet:A kódrészlet megtekintéséhez be kell jelentkezned, vagy nincs jogosultságod a tartalom megtekintéséhez.